Tel: 01934 352300

Newpaintco Limited

Independent Company founded 2001 specialising in Architectural & Industrial Coatings

Newpaintco

Supplier of Architectural Coatings

Licensee from Arkema for Kynar Aquatec®, Authorised Distributor for Axalta Coatings

• Specialising in Colour Matching Metallics, Mica • Sample and Panel Painting • Touch up for Powder Coatings





ARCHITECTURAL COATINGS

Arkema Kynar® PVDF

• A Single Component Product (ease of application)
• No Isocyanates
Warranty backed performance - Warranty for Coating
• Provides ultimate protection against UV degradation
• Excellent resistance to pollution, dirt pick-up and staining

Kynar Aquatec®

• Water based Coatings based on Kynar® (PVDF) Resin
• Volatile Organic Content (VOC's) <5%
• Nearly 20 years' field exposure

Kynar® ADS2 Coating

PVDF single component solvent based coating:
• Meets AAMA 2605.98 10 years Florida Performance
• PVDF based Coatings have over 40 years worldwide use
• Solvent based PVDF Coating

Roofing System

• Low VOC Water Based, Elastomeric Primer, Kynar Aquatec ARC (PVDF 70:30)
• Life to repaint minimum 15 years

Axalta Coatings

• Newpaintco - Approved Distributor for Axalta; A World-leading Paint & Powder Coating Supplier
• Full range of Alkyd, 2K Acrylic Urethane and protective coatings

ViterClad 50 Finish

A high performance two pack polyurethane coating, specially designed and tested for the maintenance repainting of architectural cladding:
• Recommended for the maintenance of Colorcoat HP200* (Plastisol) and HPS200* cladding, with an expected system lifetime of up to 15 years
• Suitable for PVF2, Silicone Polyester & Polyester Cladding when applied over ViterClad Bonding Coat
• Cures at sub-zero temperatures and is tolerant of slight surface moisture during application
• Metallic shades such as RAL9006 available as ViterClad M50
• *HP200 & HPS200 are registered Trade Marks of Tata Steel UK Ltd

Type:Two Pack Polyurethane
Use:Cladding repaint
Finish:Semi-gloss
Substrate:Architectural Cladding
Application:Spray, brush, roller
Volume Solids:58%

Wood Products

• Coming Soon

A warrantee for coatings can be issued upon completion of works and following inspection of any project.

  

Top of Page